12 FUEL TANK, SEAT, TRIM
12.6
100
Mounting the seat
Main work
O.
Remove screw
Raise the rear of the seat, pull the seat back, and lift it off.
Main work
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
Push the seat forward.
Make sure that the seat is locked in correctly.
Mount and tighten screw
Guideline
Remaining screws,
chassis
Finishing work
Install the air filter box cover.
O.
M6
10 Nm (7.4 lbf ft)
(l!!JJ
p. 95)