Iwatsu SS-500 Series Instruction Manual page 73

How to finish measurement
1
Pull the opening lever of
the sensor toward you
to retract the upper jaw,
and remove the sensor
from the conductor
under measurement.
2
Slide the opening lever
toward the lower jaw until
the JAW UNLOCKED
indicator is hidden.
The upper jaw will be locked
in place.
The JAW UNLOCKED
go out.
3
Disconnect the
termination unit from the
BNC input terminal on the
waveform measuring
instrument.
While pulling the unlock lever,
pull out the termination unit
straight.
4
Set the
Supply in the OFF position.
LED will
POWER switch of the PS-54 Power
Finishing Measurement
2
67