Iwatsu SS-500 Series Instruction Manual page 27

1
Jaws
Clamp this part around a conductor to be measured by
operating the opening lever, which allows the upper jaw to
slide (retract/extend).
2
Sensor aperture
A conductor to be measured must pass through this
aperture.
3
Sensor heads
The sensor heads, located inside the jaws, detects currents.
4
Current direction indicator
Clamp the sensor around the conductor such that the
direction this arrow indicates matches the current direction of
a conductor to be measured.
5
JAW UNLOCKED
If this indicator appears, the upper jaw is not locked in place.
6
Opening lever
To retract and extend the upper jaw, always operate this
lever. This lever allows you to retract and lock the upper jaw
in place.
Name and Function of Each Part
indicator
1
21