Iwatsu SS-500 Series Instruction Manual page 3

Measurement Procedure
Be sure to familiarize yourself with the "Usage Notes"
section (p. 8 ), each instruction of use, and safety notes
presented at the beginning of each instruction of use.
Inspecting the Device Before Use
Preparing for Measurement
• Provide power to the device.
• Connect the termination unit to your waveform
measuring instrument.
• Execute demagnetization and automatic zero-
adjustment.
Measuring Currents
• Clamp the sensor around a conductor to be
measured.
• Measure a current.
Finishing Measurement
(p. 2 6)
(p. 2 8)
(p. 4 1)
(p. 6 5)