Iwatsu SS-500 Series Instruction Manual page 49


Ensure that the insulation on a conductor is
not worn or damaged before clamping the
sensor around the conductor to be measured.

Take care not to damage the insulation when
clamping the sensor around the conductor.
Damage to the conductor insulation can cause electric
shock.

Connect the SS-530/SS-531 to the PS-54
Power Supply and a waveform measuring
instrument (oscilloscope or recorder) before
clamping the device around a live line to be
measured.
Failure to do so may cause electric shock or a short-
circuit.
DANGER
Measuring Currents
2
43