Table of Contents
Advertisement
1
Output terminal
The device converts a captured current waveform into a
voltage waveform by multiplying a particular sensitivity
according to a specified current range and outputs the
voltage waveform from this terminal. Connect this terminal
to a BNC input terminal of your waveform measuring
instrument.
2
Unlock lever
To disconnect the output terminal, pull on the termination unit
while simultaneously pulling this lever.
3
Vents
The unit has the vents on the sides and bottom. Do not clog
them.
4
Serial number
The serial number consists of nine digits. The first two digits
indicate the year of manufacture, while the second two
digits indicate the month of manufacture. Do not remove this
sticker as the number is important.
5
Power plug
Power is provided to the SS-530/SS-531 through this plug.
Connect this plug with the PS-54 Power Supply.
6
Shell
Pull on the power plug while simultaneously pulling this shell
to disconnect the plug.
You can easily connect and disconnect
the termination unit with two fingers
even when multiple termination units
are connected to a waveform measuring
instrument.
Name and Function of Each Part
1
17
Advertisement
Table of Contents
