Iwatsu SS-500 Series Instruction Manual page 41


Arrange the termination unit and a BNC input
terminal of your waveform measuring
instrument in a straight line when connecting
the termination unit.
Failure to do so may damage the output terminal.

When connecting the output terminal to an
input terminal that is not a BNC terminal
through a conversion plug, make sure that the
polarity is as follows:
BNC center contact: Positive
Outer conductor:
Failure to do so may damage the device and your
waveform measuring instrument.
Preparing for Measurement
NOTICE
Ground potential
(or negative)
2
35