Iwatsu SS-500 Series Instruction Manual page 36

Preparing for Measurement
How to provide the power to the SS-530/SS-531
1
Ensure that the
Power Supply is set to OFF.
2
Connect the power cord to the power inlet on
the back of the PS-54 Power Supply.
3
Slide the opening lever
of the sensor toward the
lower jaw until the
JAW UNLOCKED
indicator is hidden.
The upper jaw will be locked
in place.
4
Connect the power plug of
the SS-530/SS-531 to the
power receptacle of the
PS-54 Power Supply.
30
POWER

Do not clamp the sensor around any
conductor.
switch of the PS-54
Power receptacle