Iwatsu SS-500 Series Instruction Manual page 57

1
Pull the opening lever of
the sensor toward you to
retract the upper jaw.
2
Clamp the sensor around
a conductor to be
measured.
• Have the current direction
indicator match the
direction of the current to be
measured.
• Place the conductor at
the center of the sensor
aperture.
3
Slide the opening lever
toward the lower jaw until
the JAW UNLOCKED
indicator is hidden.
The upper jaw will be locked
in place.
The JAW UNLOCKED
will go out.
High-
potential side
LED
Measuring Currents
Low-potential side
(Ground potential
side)
2
51