Expansion cards and backup units
Figure 142: Example - routing FBU345 adapter cables
▶ Connect the FBU345 adapter cables:
1 FBU345 adapter cable, is routed through the recess on top side and
RAID controller in riser module 3
2 FBU345 adapter cable, is routed to bottom side and RAID controller in
riser module 1
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Updating expansion card firmware" on page
226
52.
56.
58.
Upgrade and Maintenance Manual
72.
RX1330 M4