Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 355

For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY RX1330 M4
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
The requirements are:
– iRMC S5 Firmware 1.2 or later
– supported OOB RAID system
16.2.3.3 LAN indicators
Figure 246: LAN indicators
1 LAN link/transfer indicator
LAN link/transfer indicator (1)
Status
green on
off
flashing green
RX1330 M4
2
Description
A LAN connection has been established.
LAN is not connected.
LAN data transfer is in progress.
Upgrade and Maintenance Manual
LAN speed indicator
Appendix A
355