Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 208

Expansion cards and backup units
Removing the riser card
▶ Remove the expansion card, see
"Removing an expansion card" on
page 203.
Figure 121: Removing the riser card - example riser module 1
▶ Remove the two screws (1).
▶ Remove the riser card (2).
Installing the riser card
Figure 122: Installing the riser card - example riser module 1
▶ Insert the riser card (1).
▶ Fasten the riser card with two screws (2).
▶ Install the expansion card, see
"Installing an expansion card" on page 196.
208 Upgrade and Maintenance Manual RX1330 M4