Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 294

System board and components
▶ Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
▶ Remove the CMOS battery (2).
CAUTION
Sharp tools such as screw drivers might damage system board
components in case of slipping.
▶
If the CMOS battery cannot be ejected without the help of a tool,
it is recommended to use a tooth pick.
▶ Insert a new CMOS battery of the same type into the socket (3) and (4).
Concluding steps
▶ Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Verifying the system time settings" on page
You must manually change the BIOS settings according to the note
on your current BIOS settings, see
on page
294
64.
52.
293.
Upgrade and Maintenance Manual
56.
58.
82.
"Note on BIOS settings recovery"
RX1330 M4