Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 165

Installing the new 4x 2.5-inch HDD backplane (right side) or PCIe SSD
backplane
Figure 83: Installing the 4x 2.5-inch HDD backplane (right side)
▶ Position the HDD backplane on the four hooks (see circles).
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
into the guides (A).
CAUTION
▶
Ensure that none of the cables are strained or damaged!
Figure 84: Connecting cables to the 4 x 2.5-inch HDD backplane (right side)
1 OOB cable to connector "SMBus"
2 SAS cable to connector "X5"
▶ Connect all cables to the HDD backplane.
RX1330 M4
Hard disk drive (HDD) / solid state drive (SSD)
3
Upgrade and Maintenance Manual
Power cable
165