Access Panel (Hood) Sensor (Optional) - HP xw4200 Service And Technical Reference Manual

Access Panel (Hood) Sensor (Optional)

To remove the hood sensor:
1 Disconnect power from the system
2 Disconnect the hood sensor
3 Slide the hood sensor 2 forward as shown in the following illustration.
CAUTION The hood sensor bracket and the chassis contain sharp edges that present a safety hazard.
Be careful when sliding the hood sensor forward.
4 Pull the hood sensor
To replace the hood sensor, reverse the previous steps.
78 REMOVAL AND REPLACEMENT
(page 73) and remove the access panel
1 from the system board.
3 down and remove it from the chassis.
3
2
1
(page 77).