Optical Drive (Minitower Position)
To remove an optional optical drive, you must first release the drivelock. To release the optical drive:
1
Disconnect power from the system
workstation on its side with the system board facing up.
2
Disconnect the power 1, drive 2, and audio
NOTE
The audio cable is included with Linux-based systems only. Windows-based systems do not
require the audio cable.
3
After removing the front bezel and bezel blanks, lift the green drivelock release lever
slide the drive
102 REMOVAL AND REPLACEMENT
(page
1
2
3
2
out of the chassis.
1
73), remove the access panel
3
cables from the drive.
(page
77), and lay the
1
and gently
2