HP xw4200 Service And Technical Reference Manual page 109

SATA
For more information on SATA hard drives and the SATA RAID configuration, see
page 157.
To remove a SATA hard drive:
1 Disconnect power from the system
workstation on its side with the system board facing up.
2 Remove the cables as shown in the following illustration.
3 Pull the release latch 1
(page 73), remove the access panel
and remove the SATA drive
1
(page
2 as shown in the following illustration.
2
REMOVAL AND REPLACEMENT OF COMPONENTS 109
"SATA Devices" on
77), and lay the