Diskette Drive (Optional)
To remove an optional diskette drive:
1
Disconnect power from the system
front bezel
2
Disconnect the cables from the back of the diskette drive.
3
After removing the front bezel and bezel blanks, lift the green drivelock release tab
drive
2
out at the same time.
To replace an optional diskette drive, reverse the previous steps. Align the screws with the slots on the
drive, and slide the drive into the unit until it snaps into place.
106 REMOVAL AND REPLACEMENT
(page
80).
(page
73), remove the access panel
1
2
(page
77), and remove the
1
and slide the