HP xw4200 Service And Technical Reference Manual page 105

4 After pulling the drive 1
5 Verify the jumper settings on the new drive are set correctly.
6 To install a drive, insert the four guide screws
drive, and slide the drive
7 Connect the drive, power, and audio cables.
NOTE The audio cable is included with Linux-based systems only. Windows-based systems do not
require the audio cable.
out, remove the four guide screws
2
1 into the drive. Align the screws with the slots on the
2 into the unit until it snaps into place.
1
2 from the drive.
2
1
1
2
REMOVAL AND REPLACEMENT OF COMPONENTS 105