Clearing Passwords; Cable Lock Provision (Optional); Security Lock (Optional); Hood Lock (Smart Cover Lock) (Optional) - HP Xw4550 - Workstation - 2 GB RAM Technical Reference Manual

●
PC component failure (such as processor or power supply)
●
Forgotten password
NOTE: The FailSafe Key is a workstation accessory that must be ordered from HP. Be prepared; order
this key before you actually need it.
You can order a FailSafe Key in either of the two following key configurations:
●
Smart Cover FailSafe Key, tamper-resistant T-15 wrench
●
Smart Cover FailSafe Key, tamper-resistant screwdriver bit.
To determine the correct HP part number for each key configuration, see http://partsurfer.hp.com.
To obtain the FailSafe Key, contact HP post sales support by telephone or online:
●
HP post sales support telephone: 1-800–hp-invent
●
HP post sales support Web site: http://welcome.hp.com/country/us/en/wwcontact_us.html.

Clearing Passwords

If you forget your password, you cannot access the workstation. Refer to the section on resetting the
password jumper in the appendix.

Cable lock provision (optional)

The rear panel of the chassis can accommodate a cable lock accessory that allows the workstation to
be physically secured to a work area.

Security lock (optional)

The security lock prevents entire system theft and discourages access panel removal.

Hood lock (Smart cover lock) (optional)

Prevents removal of the access panel and all internal components including optical and diskette drives.
This lock eliminates the need for a physical key by enabling password-protected locking and locking by
a local or a remote user.

Hood sensor (Smart cover sensor) (optional)

This sensor is set in the Computer Setup (F10) Utility. You can set this to notify a user if the access
panel has been removed.

Fault notification and recovery

Fault notification and recovery features combine innovative hardware and software technology to
prevent the loss of critical data and minimize unplanned downtime
If the workstation is connected to a network managed by HP Client Manager Software, the computer
sends a fault notice to the network management application. With HP Client Manager Software, you can
also remotely schedule diagnostics to automatically run on all managed PCs and create a summary
report of failed tests.
ENWW Workstation management 45