HP xw4200 Service And Technical Reference Manual page 98

PCI or PCI Express Removal
To remove a PCI or PCI Express card:
1 Disconnect power from the system
workstation on its side with the system board facing up, and remove the PCI retainer
2 Lift the PCI levers 1 by first pressing down on them and then out.
3 Lift the PCI card (2, left) out of the chassis. If removing a PCI Express card (2, right), remove the
power supply cable (not shown), if required, and move the "hockey stick" lever 3 to release the card
and lift it out of the chassis. Store the card in an anti-static bag.
4 Close the PCI levers.
Figure 4-1
PCI card removal (left) and PCI Express card removal (right)
98 REMOVAL AND REPLACEMENT
(page 73), remove the access panel
1
1
2
(page
1
3
2
77), lay the
(page 97).
1