HP xw4200 Service And Technical Reference Manual page 61

LOCKING THE SOLENOID HOOD LOCK
To activate and lock the solenoid hood lock:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart.
2 Wait for the
F10=Setup
prompt, press the F10 key to enter the F10 setup utility.
NOTE If you do not press the F10 key at the appropriate time, you must restart the workstation and try
again to access the utility.
3 Select Security>Smart Cover>Cover Lock>Lock option.
4 Before exiting, select File>Save Changes and Exit.
UNLOCKING THE SOLENOID HOOD LOCK
To unlock the solenoid hood lock:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart.
2 Wait for the
F10=Setup
prompt, press the F10 key to enter the F10 setup utility.
NOTE If you do not press the F10 key at the appropriate time, you must restart the workstation and try
again to access the utility.
3 Select Security>Smart Cover>Cover Lock>Unlock.
4 Before exiting, select File>Save Changes and Exit.
USING THE ACCESS PANEL FAILSAFE KEY
If you enable the solenoid hood lock and cannot enter your password to disable the lock, you will need a
access panel FailSafe Key to open the workstation access panel. You will need the key in any of the
following circumstances:
Power outage
Startup failure
PC component failure (such as processor or power supply)
Forgotten password
CAUTION The access panel FailSafe Key is a specialized tool available from HP. Be prepared; order
this key before you need one.
prompt to appear on the lower right corner of the screen. Once you see the
prompt to appear on the lower right corner of the screen. Once you see the
DESKTOP MANAGEMENT 61