Video Memory - HP Vectra VE4 User Manual

Video Memory

Your PC is supplied with 1 MB of video memory and you can install an additional 1 MB
inside your PC. The PC has two sockets in which to install the two 512 KB memory chips
required, which must both be installed at the same time.
For a list of additional settings available once you have installed the extra memory, see
"Available Video Resolutions."
CAUTION Static electricity can damage electronic components. Turn all equipment off.
Don't let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top of the power
supply unit while you are removing the accessory from the bag. Handle the
accessory as little as possible and with care.
Installing Video Memory Chips
1. Disconnect the power supply cable.
2. Remove the computer's cover and power supply unit.
3. Align the video memory chip directly over the socket, making sure that the tapered edge
is facing the rear of the computer.
4. Firmly press the memory chip completely into the socket.
5. Repeat steps 3 and 4 for the second memory chip.
6. Install any other accessories, then refer to "Checking the Installation" to complete the
installation.
Vectra VE 4/xx User's Guide 3 Installing Accessories In Your PC 43