HP Vectra VE4 User Manual page 40

Installing a Main Memory Module
1. Disconnect the computer's power supply cable.
2. Remove the computer's cover and power supply unit (see "Removing and Replacing the
Cover" and "Removing and Replacing the Power Supply Unit").
3. If you need to remove an existing module to gain access to the vacant socket:
4. Align the module with the socket, making sure that the end with a 'cutout' is at the same
end as A or B printed on the system board.
5. Slide the memory module into the slot at 45°.
6. Pivot the memory module to the vertical position. The retaining clips will click softly
when the module is correctly located.
7. If you have removed a module to gain access, replace it.
Vectra VE 4/xx User's Guide 3 Installing Accessories In Your PC
Release the retaining
clip and pull the
module forward and
out of the socket
40