Using The Hp Setup Program - HP Vectra VE4 User Manual

Using the HP Setup Program

The integrated (ROM-based) Setup program displays your PC's configuration and allows
you to set certain parameters.
Starting the Setup Program
1. Turn on the display and the computer.
If the computer is already turned on, save your data and exit all programs, then press
and
[CTRL] [ALT]
2. Press [F2] while <Setup=F2> is displayed at the bottom of the screen during the
power-on system hardware test.
TIP To avoid missing [F2] (which is displayed only briefly), you can press [F2] as soon
as the power-on-system-hardware-test has passed the Flexible Disk Drives test.
3. The Setup program will appear.
Administrator Password...Not Set
Administrator Password...Not Set
Flexible Drive 1.........1.44 MB
Flexible Drive 2.........1.44 MB
Start from FDD...........Enabled
If a password has been set, you will be prompted to enter it.
Use the arrow keys to move the highlight from one field to another.
Use the [F7] or [F8] key to display available values.
Use the [F3] key to save your settings and exit the Setup program.
Vectra VE 4/xx User's Guide 2 Using Your PC
to restart the PC.
[DELETE]
Setup Version xx.
User Password...........Not Set
Date (YYYY,mm,dd).......1995/01/07
Time (hh:mm:ss).........12:04:30
Power-on Numlock State..On
Key Autorepeat..........Medium
<Setup=F2>
16