HP Vectra VE4 User Manual page 53

7. Connect the power and data cables to the rear of the device installed in the middle
shelf. (The connectors are shaped to go in one way only.) If you are installing a CD-
ROM drive, refer to the manual supplied with the drive for detailed installation
instructions.
Connector for 5.25-inch Drive
Connector for Flexible Disk
Drive or CD-ROM
8. Replace the hard disk drive in the rear shelf.
9. Modify the cove r so you can use the device in the middle shelf. Turn the cover upside
down. Unclip the locking tab, and lift the panel out.
10. Install any other accessories before referring to "Checking the Installation" to complete
the installation.
Vectra VE 4/xx User's Guide 3 Installing Accessories In Your PC
Data Cable
Power Cable
53