Checking The Installation - HP Vectra VE4 User Manual

Checking the Installation

1. Replace the computer's cover, and connect all cables.
2. Turn on the display and then the computer.
3. When the power-on system hardware test screen appears, check that accessories you
have installed are recognized.
Video Memory
System BIOS (version QGP.xx.xx)............................PASSED
Video (Integrated VGA, Memory Size: 2 MB)..................PASSED
Processor
System Board (Processor: 486DX2, 66 MHz)...................PASSED
Memory cache (256KB).......................................PASSED
Memory cache (256 KB)
Cache Memory
Memory (8MB 640KB Base, 384KB Reserved, 7168 KB Extended)..PASSED
Keyboard/Mouse.............................................PASSED
Main memory
Flexible Disk Drives (A: 1.44 MB, B: 1.44 MB)..............PASSED
Parallel Ports.............................................PASSED
Flexible Disk
Serial Ports (3F8h)........................................PASSED
Drive
Hard Disk Drives (C: 850MB, D: 270 MB).....................PASSED
System Configuration.......................................PASSED
Hard Disk
Drive
---------------------------------------------------------
<Setup = F2>
4. If an error code appears, see "Error Messages."
5. You may wish to change the configuration settings of your PC after installing certain
accessories. The options available are detailed in the following section.
Vectra VE 4/xx User's Guide 3 Installing Accessories In Your PC
Hewlett-Packard System Hardware Test
HP VECTRA VE4/xx
8MB
2 MB
66
B: 1.44 MB
D: 270 MB
58