HP Vectra VE4 User Manual page 17

Use the [F12] key to exit the Setup program without saving any changes.
Setup Fields
The following section explains the fields that you may wish to change, for example, the date
and time if your PC does not show the correct local time.
Date and Time
Power-on Numlock
State
Key Autorepeat
The other fields are explained later in the manual at the place where you may need to
modify the settings. For easy reference, all Setup fields can be located in the index, under
"HP Setup program fields".
Vectra VE 4/xx User's Guide 2 Using Your PC
Enter the correct values.
This field determines if the numeric keys on the right of the
keyboard are set to numeric values (On) or cursor control (Off)
when the PC is started.
This field determines the speed that a key repeats itself when
the key is held down. Options available are Slow, Medium,
and Fast.
17