HP Vectra VE4 User Manual page 25

Configuring Power Management in Windows
1. Double-click on the Main icon to display the Main program group.
2. Double-click on the Control Panel icon
3. Double-click on the Power icon to display the Power dialog box.
4. Select the Advanced mode.
5. Click on Options and the Setup Power Management dialog box appears.
6. Set the "Standby" timeout (30 minutes, by default ), the "Sleep At" time (set to Off, by
default), or both.
NOTE For more information about the Windows Power Management utility, click on the
Help button in the Setup Power Management dialog box.
7. Click on OK to close the Setup Power Management dialog box.
8. Click on OK to enable Power Management in Windows.
Vectra VE 4/xx User's Guide 2 Using Your PC 25