Specifying Destinations; Specifying Destinations By Entering The Fax Number; Specifying Destinations Using One-Touch Keys; Specifying Destinations Using Coded Dial Codes - Canon imageCLASS D1370 Basic Operation Manual

Specifying Destinations

Specifying Destinations

Specifying destinations by entering the fax number

Specifying destinations using one-touch keys

Specifying destinations using coded dial codes

6-4
Specify the fax number using the numeric keys, [
(SYMBOLS).
To modify destinations
• To cancel the entered destination
Press and hold [ ] (Clear).
• To delete the last character of the entered
destination
Press [ ] (Clear).
Press the one-touch key (01 to 19) in which the destination is registered.
To select a destination from the one-touch keys, you need to register
destinations in these keys in advance.
"Registering and Editing One-Touch Keys" (→P. 5-3)
When the wrong key is pressed
(1) Press [ ] (Clear).
(2) Select <Yes> using [ ] and press [OK].
* To clear all the scan settings specified, press [
Press [ ] (Coded Dial), and then enter the three-digit registration number
(001 to 181) with the numeric keys.
To select a destination from the coded dial codes, you need to register
destinations in these codes in advance.
"Registering and Editing Coded Dial Codes" (→P. 5-6)
When the wrong key is pressed
(1) Press [ ] (Clear).
(2) Select <Yes> using [ ] and press [OK].
* To clear all the scan settings specified, press [
] (Tone), and [ ]
]
(Reset).
]
(Reset).