Cannot Read Data On The Image Plate - AGFA CR Reader User Manual

68 | CR Reader, CR Advanced Reader, CR Multiformat Reader | Operating CR Reader,
CR Advanced Reader and CR Multiformat Reader

Cannot read data on the image plate

Details
Possible cau-
ses
Solutions
Related Links
Cleaning the Optical Unit
2591D EN 20191028 1712
The following error message is displayed in the Digitizer Re-
mote Display:
Error during read out of data on the image plate. Remove the
cassette and press the confirm button. Do not use the cas-
sette again before an inspection.
Defect/soiled bar code on image plate
Optics cleaning lever in optical path and not positioned at
left side.
Remove the plate from the cassette -as described in the AGFA
CR Plates and Cassettes User Manual- and check if the bar-
code is fully legible. If necessary, remove any dirt (conform
the plate cleaning instructions).
At the left side, put the optics cleaning lever back to the
"home" position so that the digitizer can read the barcode on
the image plate.
on page 75