Image Plate Transport Problems - AGFA CR Reader User Manual

CR Reader, CR Advanced Reader, CR Multiformat Reader | Operating CR Reader, CR Advanced

Image Plate Transport Problems

Details
Possible cau-
ses
Solutions
The following error message is displayed in the Digitizer Re-
mote Display:
Image plate is not erased! Remove the cassette and press the
confirm button. Do not use the cassette again before an in-
spection.
Image plate is not scanned and erased! Remove the cassette
and press the confirm button. Do not use the cassette again
before an inspection.
A problem occurred when transporting the image plate in
the digitizer.
Remove the cassette and press the confirm button and per-
form following checks:
1. Check the cassette for damages.
2. Open the cassette and check the shutter for damages.
3. Check if image plate is bent. Put the image plate on a flat
surface. The entire image plate must touch the surface.
The image plate must be exchanged if there is a gap be-
tween surface and a part of the image plate e.g. if you can
see a lifted edge or a sharp bend.
Reader and CR Multiformat Reader | 69
2591D EN 20191028 1712