Cassette Could Not Be Identified - AGFA CR Reader User Manual

66 | CR Reader, CR Advanced Reader, CR Multiformat Reader | Operating CR Reader,
CR Advanced Reader and CR Multiformat Reader

Cassette Could Not Be Identified

Details
Cause
Solution
2591D EN 20191028 1712
This error message is displayed on the NX PC:
A cassette has been inserted in the digitizer and the ID but-
ton was clicked directly afterwards.
Wait until the digitizer has read the data on the cassette and
sent it to the NX PC. This may take a few seconds. The error
message will disappear.