Status Indicator - AGFA CR Reader User Manual

CR Reader, CR Advanced Reader, CR Multiformat Reader | Introduction to CR Reader,

Status Indicator

The indicator informs the user by light signals about the status of the digitizer.
It is positioned at the front of the digitizer, so that it is visible from a distance.
Color Constant/Blink-
ing
Blue Constant
Blinking
Green Constant
Yellow
Blinking
Red Constant
Blinking slowly
Blinking fast
Blinking - 3 pul-
ses
Related Links
Troubleshooting
CR Advanced Reader and CR Multiformat Reader | 17
Status
Activating the eras-
ing cycle
Busy with erasing
and return of the IP
into cassette
Standby mode
(Ready)
Cassette is ready for
removal
Busy with scan-
ning, erasing and
return of the IP into
cassette
Error
Digitizer not ready
Digitizer not con-
nected to Digitizer
Remote Display UI
Digitizer not con-
nected to control
PC
on page 63
Action
Insert cassette to erase
the image plate.
Wait.
Proceed.
Remove cassette.
Wait.
Consult the Digitizer Re-
mote Display UI (User
Interface) messages on
the control PC. Refer to
section 'Troubleshoot-
ing'.
Refer to section 'Trou-
bleshooting'.
2591D EN 20191028 1712