Table of Contents
Advertisement
28 | CR Reader, CR Advanced Reader, CR Multiformat Reader | Introduction to CR Reader,
CR Advanced Reader and CR Multiformat Reader
Labels
Always take into account the markings and labels provided on the inside and
outside of the machine. A brief overview of these markings and labels and
their meaning is given below.
2591D EN 20191028 1712
or
Safety warning, indicating that the manuals
should be consulted before making any connec-
tions to other equipment. The use of accessory
equipment not complying with the equivalent
safety requirements of this digitizer may lead to a
reduced level of safety of the resulting system.
Consideration relating to the choice of accessory
equipment shall include:
• Use of the accessory equipment in the patient
vicinity,
• Evidence that the safety certification of the ac-
cessory equipment has been performed in ac-
cordance with respective IEC standards (e.g.
IEC 60950 for data processing equipment or
IEC 60601-1 for medical equipment).
In addition all configurations must comply with
the requirements for medical electrical systems
according to IEC 60601-1. The party that makes
the connections acts as system configurator and is
responsible for complying with the systems stand-
ard.
If required contact your local service organization.
In order to reduce the risk of electric shock, do not
remove any covers.
Caution hot:
Keep hands clear from the erasure unit.
Power button
Advertisement
Table of Contents
