Table of Contents
Advertisement
CR Reader, CR Advanced Reader, CR Multiformat Reader | Introduction to CR Reader,
Safety Instructions for Laser Products
The digitizer is a Class 1 Laser Product. It uses one laser diode of a 80 mW
type, classification class IIIb, wavelength 640-670 nm. The laser beam
divergence is 120 - 350 mrad. The laser beam's deflection frequency is 70 1/s
up to 90 1/s.
Under normal operating conditions - device with all covers - there can be no
laser radiation outside the digitizer.
The technical concept does not allow the user to remove the top cover.
The cassette unit and the back cover can be removed e.g. to solve cassette or
image plate jams. The digitizer must be switched off before removing the
cassette unit or opening the back of the device.
CR Advanced Reader and CR Multiformat Reader | 31
CAUTION!
CLASS 3B LASER RADIATION:
WHEN OPEN AVOID DIRECT
EVITAR LA EXPOSICIÓN AL HAZ
EXPOSURE TO THE BEAM!
CUANDO LA TAPA EST Á ABIERTA.
VORSICHT !
LASERSTRAHLUNG KLASSE 3B:
FAISCEAU LASER CLASSE 3B:
WENN ABDECKUNG GEÖFFNET
QUAND CAPOT OUVERT ÉVITER
NICHT DEM STRAHL AUSSETZEN!
DE S´EXPOSER AU RAYÓN!
CAUTION:
User interventions other than those described in this manual
can be hazardous with regard to laser radiation.
CUIDADO!
RAYO LASER CLASE 3B:
ATTENTION!
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
LASERKLASSE 1
2591D EN 20191028 1712
Advertisement
Table of Contents
