Table of Contents
Advertisement
CR Reader, CR Advanced Reader, CR Multiformat Reader | Operating CR Reader, CR Advanced
Troubleshooting
In case of a malfunction of the digitizer, consult the Digitizer Remote Display
UI (User Interface) messages on the control PC.
Error messages are displayed in a dialog box in the middle of the screen or in a
fixed part of the screen. These messages will tell that either a problem has
occurred or that a requested action cannot be performed.
The user must read these messages carefully. They will provide information on
what to do from then on. This will be either performing an action to resolve
the problem or to contact your local service organization.
Details on the contents of messages can be found in the service
documentation which is available to Agfa trained service personnel.
Topics:
•
Digitizer Remote Display
•
Connection Problems
•
Cassette Could Not Be Identified
•
Cassette release button pressed before end of cycle
•
Cannot read data on the image plate
•
Image Plate Transport Problems
•
Removing a Jammed Image Plate
•
Behavior in Case of Power Failure
•
Cleaning the Optical Unit
Reader and CR Multiformat Reader | 63
2591D EN 20191028 1712
Advertisement
Table of Contents
