Table of Contents
Advertisement
Appendix A. Hardware disassembling for recycle
Follow the instructions in this section to recycle components with compliance with local laws or regulations.
Disassemble the system board for recycle
Follow the instructions in this section to disassemble the system board before recycling.
Before disassembling the system board:
1. Remove the system board from the server (see
2. Refer to local environmental, waste or disposal regulations to ensure compliance.
Complete the following steps to disassemble the system board:
Step 1.
Remove the following components as illustrated:
• 15 slotted screws
• Two standoffs (with 12 mm wrench)
• One plunger (with 11 mm and 16 mm wrench)
• Four PH2 captive screws on the heat sink
Figure 134. Disassembling the system board
Step 2.
Separate the system board from the supporting sheet metal.
© Copyright Lenovo 2019, 2022
"Remove the system board" on page
118).
161
Advertisement
Table of Contents
