Table of Contents
Advertisement
Two options are available for this combination:
Note: Install the processor and memory expansion tray before connecting the signal cables to NVMe
connectors on the expansion tray (see
1. With one SATA/SAS RAID adapter (16i)
Figure 35. Cable routing, AnyBay backplane + AnyBay backplane
Table 33. Cables and adapters for routing
PCIe switch card
1
SATA/SAS RAID adapter (16i)
2
NVMe connectors on the processor and memory
3
expansion tray
Direct NVMe signal cables for processor and
4
memory expansion tray
2. With two SATA/SAS RAID adapters (8i)
"Install the processor and memory expansion tray" on page
SATA/SAS signal cables (900 mm)
5
SATA/SAS signal cables (720 mm)
6
NVMe signal cables for PCIe switch card
7
113).
.
Chapter 2
Server components
43
Advertisement
Table of Contents
