Table of Contents
Advertisement
Figure 95. CMA adjustment
If you have installed the 2U CMA Upgrade Kit for Toolless Slide Rail or Toolless Slide Rail Kit with 2U
CMA, do the following:
a. Press down the stop bracket and rotate it to the open position.
b. Rotate the CMA out of the way to gain access to the power supply bay.
3. Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
To remove a hot-swap power supply unit, complete the following steps:
Step 1.
Press and hold on the orange release tab.
ThinkSystem SR850P Maintenance Manual
96
https://www.youtube.com/playlist?list=
.
Advertisement
Table of Contents
