Connecting signal cables to one backplane
When one backplane is installed, see the following illustrations for cable routing.
One 8-bay backplane
Figure 29. Cable routing, 8-bay backplane
Table 27. Cables and adapters for routing
SATA/SAS RAID adapter (8i)
SATA/SAS signal cables (720 mm)
1
2
One AnyBay backplane
Note: Install the processor and memory expansion tray before connecting the signal cables to NVMe
connectors on the expansion tray (see
"Install the processor and memory expansion tray" on page
113).
.
Chapter 2
Server components
37