2. With SATA/SAS RAID adapter (8i)
Figure 32. Cable routing, 8-bay backplane + 8-bay backplane
Table 30. Cables and adapters for routing
SATA/SAS RAID adapter (8i)
1
SATA/SAS RAID adapter (8i)
2
8-bay backplane + AnyBay backplane
Notes:
• When installing a 8-bay backplane and a AnyBay backplane, always install the 8-bay backplane to drive
bay 0-7, and the AnyBay backplane to drive bay 8-15.
• Install the processor and memory expansion tray before connecting the signal cables to NVMe connectors
on the expansion tray (see
ThinkSystem SR850P Maintenance Manual
40
"Install the processor and memory expansion tray" on page
SATA/SAS signal cables (720 mm)
3
SATA/SAS signal cables (720 mm)
4
113).