Fm Mode Operation; Repeater Operation; Tone Squelch Operation - Yaesu FT-710 Operation Manual

Repeater Operation

The FT-710 may be operated on 29MHz and
50MHz repeaters.
1. Set the operating mode to FM.
2. Set to the desired repeater output frequency
(downlink from the repeater).
3. Press the [FUNC] knob.
4. Select [RADIO SETTING] → [MODE FM] →
[RPT SHIFT].
5. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select the de-
sired repeater shift direction. The selections
are:
"SIMP" → "+" → "–" → "SIMP"
● To program the proper repeater shift, use
Menu items "RPT SHIFT(28MHz)" and "RPT
SHIFT(50MHz)", as appropriate.
6. Rotate the [FUNC] knob to select [ENC/DEC].
7. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select "ENC".
8. Rotate the [FUNC] knob to select [TONE
FREQ].
9. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
10. Press the [FUNC] knob, or wait for about 3
seconds to save the setting.
11. Touch [BACK] several times to return to nor-
mal operation.
Press and hold the microphone PTT switch to be-
gin transmitting.
67.0 69.3 71.9
100.0 103.5 107.2
151.4 156.7 159.8
189.9 192.8 196.6
250.3 254.1 -

FM Mode Operation

CTCSS Tone Frequency (Hz)
74.4 77.0 79.7
110.9 114.8 118.8
162.2 165.5 167.9
199.5 203.5 206.5
- - -

Tone Squelch Operation

The "Tone Squelch" may be activated to keep the
receiver silent until an incoming signal modulated
with a matching CTCSS tone is received. The
receiver squelch will then open in response to re-
ception of the required tone.
1. Set the operating mode to FM.
2. Set the transceiver to the desired frequency.
3. Press the [FUNC] knob.
4. Select [RADIO SETTING] → [MODE FM] →
[ENC/DEC].
5. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select "TSQ".
6. Rotate the [FUNC] knob to select [TONE
FREQ] .
7. Rotate the [FUNC] knob, or touch "<" or ">"
on either side of the value to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
8. Press the [FUNC] knob, or wait for about 3
seconds to save the setting.
9. Touch [BACK] several times to return to nor-
mal operation.
82.5 85.4 88.5
123.0 127.3 131.8
171.3 173.8 177.3
210.7 218.1 225.7
- - -
91.5 94.8 97.4
136.5 141.3 146.2
179.9 183.5 186.2
229.1 233.6 241.8
- - -
55