Sets The Aprs And Data Communication Operating Band - Yaesu FTM-300DR Advance Manual

WP FILTER
Sets the type of beacon to be output when "WAYPOINT" is selected in "OUTPUT".
1. Rotate the DIAL knob to select [WP FILTER] then press the DIAL knob.
2. Rotate the DIAL to select the beacon type you want to output, then press the
DIAL knob.
ALL
MOBILE
FREQUENCY
OBJECT/ITEM
DIGIPEATER
VoIP
WEATHER
YAESU
CALL RINGER
RANGE RINGER Outputs only the information of stations recognized as an
The default setting: ALL

Sets the APRS and data communication operating band

Set the operating band of the APRS (internal modem) and data communication (when
using the DATA jack at the back of the main body).
1. Press and hold the [F(SETUP)] key  [DATA]  [2 DATA BAND SELECT]
APRS
Sets the APRS operating band
1. Rotate the DIAL knob to select [APRS] then press the DIAL knob.
2. Rotate the DIAL to select the APRS operating band, then press the DIAL knob.
MAIN BAND
SUB BAND
A-BAND FIX
B-BAND FIX
A=TX / B=RX Transmits using the upper band and receives using the lower
A=RX / B=TX Receives using the upper band and transmits using the lower
The default setting: B-BAND FIX
Outputs all the received beacons.
Outputs only mobile station beacons.
Outputs only the beacons of stations with frequency infor-
mation.
Outputs only the beacons of object stations or item stations.
Outputs only the beacons of digital repeater stations.
Outputs only beacons of VoIP stations such as WIRES.
Outputs only beacons of the weather stations.
Outputs only beacons of stations using Yaesu transceivers.
Outputs only the information of call sign ringer stations which
are set from [8 APRS RINGER (CS)] in the APRS Setup menu.
approaching station by the [7 APRS RINGER] range ringer
function in the APRS Setup menu.
The main band will be selected.
The sub-band will be selected.
The upper band will be selected.
The lower band will be selected.
band.
band.
56