Setting The Display Method For Memory Channels; Setting The Squelch Type For Transmission - Yaesu FTM-400DR Operating Manual

Setting the Display Method for Memory Channels

The display method for registered memory channels can be selected from the following
2 methods:
• ALL: Displays all registered memory channels
• INBAND: Only displays memory channels within the band currently in use.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [MEMORY].
3
Tap [1 MEMORY CH DISPLAY] and set the memory
channels to display.
Tapping [1 MEMORY CH DISPLAY] will switch
between [ALL] and [INBAND].
4
Press and hold M over 1 second.
The display method for memory channels is set and
the screen returns to the previous one.
Reference • Factory Setting: [ALL]

Setting the Squelch Type for transmission

Preset squelch types can be used separately for transmission and reception.
1
Press and hold M over 1 second.
The Setup Menu appears.
2
Tap [SIGNALING].
3
Tap [8 SQL EXPANSION] and select between OFF/
ON.
Tapping [8 SQL EXPANSION] switches between [ON]
and [OFF].
OFF: Use the same squelch type for transmission and
reception.
ON: Use separate squelch type for transmission and
reception.
4
Press and hold M over 1 second.
The squelch type for transmission and reception is set and the screen returns to the
previous one.
Reference • Factory Setting: [OFF]
FCC ID: K6620345X40
IC: 511B-20345X40
Setup Menu
63