Using The Timer Function - Yaesu FTM-400DR Operating Manual

Using the Timer Function

This unit is equipped with a Lap Timer and Down Timer.
Precaution
Adjust the internal clock beforehand when using the timer function.(See page 000).
● Using the Lap Timer
1
Press M shortly.
Press M shortly until clock appears.
2
Tap [MODE].
The Lap Timer appears.
3
Tap [START].
The Timer starts.
4
Tap [LAP].
The Lap Time is recorded every time [LAP] is tapped.
5
Tap [STOP].
The Timer stops.
Tapping [RESET] deletes Lap Time.
Tapping [RECALL] displays Lap Time that has been
recorded in the past.
6
Press M shortly.
Exits Timer Screen and returns to the previous screen.
● Using the Down Timer
1
Press M shortly.
Press M shortly a few times until clock appears.
2
Tap [MODE] twice
Down Timer appears.
3
Tap [SETUP].
The setting screen for time measurement appears.
4
Set time with O.
Rotate O and set [TIME] for time measurement.
Tapping [SETUP] applys the selected time.
[MINUTE] can be set in the same way.
FCC ID: K6620345X40
IC: 511B-20345X40
Communication
21