Table of Contents
Advertisement
Setting Up
B
Align all four sides of the paper stack, and then load it in the tray.
2
Important
❒ Confirm that the top of the stack is not higher than the Limit mark inside
the tray.
C
Slide the paper tray back slowly until it stops.
Important
❒ Do not slide the paper tray in with force. If you do, the front and side guide
might move.
❒ Be sure to adjust the side guides to the paper size, or paper misfeeds might
occur.
Changing the settings
Important
❒ Tray 1 is 11" × 8
❒ If you want to load the A4 paper in 2000-sheet Large Capacity Tray (optional),
contact your sales or service representative.
The following example describes changing the settings for Tray 2.
A
Slide the paper tray out slowly until it stops.
62
ZDJY002J
"K paper exclusive. Load only the 11" × 8
1
/
2
ZDJH005J
1
/
" size paper.
2
Advertisement
Table of Contents
