Table of Contents
Advertisement
A
Check the contents of the box.
❖ ❖ ❖ ❖ User Account Enhance Unit
❖ ❖ ❖ ❖ One Screw
B
Turn off the power switch and
unplug the power cable.
C
Remove two screws that are fas-
tening the Controller Board on
the back of the printer using pro-
vided screwdriver.
Reference
See P.20 "How to Use the Screw-
driver".
The removed screws will be used
later to fasten the C ontroller
Board.
D
Holding the handle, pull out the
Controller Board slowly.
E
Put the Controller Board in a flat
place.
You will install the User Account
Enhance Unit in the position as
shown in the illustration.
ZDJP025J
Installing Options
2
ZDJP025J
ZDJP702J
35
Advertisement
Table of Contents
