Setting Up
Parallel Connection
Use an interface cable to connect the printer to the host computer with a parallel
connection. The parallel interface cable is not provided with the printer.
Note
❒ Printer's parallel connection is a standard bidirectional interface. It requires a
2
standard 36-pin parallel cable compliant with IEEE 1284 and a parallel port
available on the host computer.
❒ Use shielded interface cables. Using a cable other than a shielded cable could
result in radio interference noise.
A
Turn off the printer and host computer power.
B
Connect the cable to the Parallel Port on the right side of the printer, and
then fasten with both clasps.
C
Connect the other end of the cable to the interface connector of the host
computer.
Reference
For details about settings for printing with a parallel connection, see Print-
er Client Reference 1.
70
ZDJH033J