Table of Contents
Advertisement
Setting Up
J
Hook the mounting bracket to the
hole as shown in the illustration.
2
K
Fasten the bracket with the other
thumb screw. Use a coin to fasten
it tightly.
L
Close the right cover of the 1000-
sheet Paper Feed Unit.
M
Stick labels "3" and "4" above the
handles on the front of the 1000-
sheet Paper Feed Unit.
26
Note
❒ After finishing all installation
for printing, you can check
whether the 1000-sheet Paper
Feed Unit is installed properly.
Print the Configuration Page
f ro m t h e " L i s t / T e s t P ri n t "
menu. If it is installed properly,
you will see "Paper Feed Unit
(Tray 3 & Tray 4)" under the
"Options" list.
❒ If the Paper Feed Unit is not in-
ZDJP017J
stalled properly, reinstall from
step
properly even after reinstalla-
tion, contact your sales or ser-
vice representative.
Reference
⇒ P.68 "Test Printing".
Installing the Paper Bank PS470 (2000-
sheet Large Capacity Tray)
Preparation
If you want to use the optional Du-
ZDJP018J
plex Unit, 2 Tray Finisher or 4-bin
Mailbox at the same time, install
the optional 2000-sheet Large Ca-
pacity Tray first, and then install
these options.
If you have already installed the
optional Duplex Unit, 2 Tray Fin-
isher and 4-bin Mailbox, remove
all these options before installing
the optional 2000-sheet Large Ca-
pacity Tray.
Important
❒ Before installation, check the ori-
entation of the 2000-sheet Large
Capacity Tray you want to place.
❒ When installing multiple options,
ZDJP127J
install the Paper Feed Unit first.
A
. If you cannot install it
Advertisement
Table of Contents
